EEMUA MECHANICAL PLANT AND EQUIPMENT

EEMUA Online Shop

CONFERENCES & COURSES

ELECTRICAL

INSTRUMENTATION & CONTROL

MECHANICAL PLANT AND EQUIPMENT

OFFSHORE

STORAGE TANKS AND VESSELS

NOISE

GENERAL

Online Catalogue > MECHANICAL PLANT AND EQUIPMENT

205 A Guide to the Production Testing of Valves for the Energy, Process and related Industries This Guide sets out recommended production tests to be applied to the main types of valve used in the energy, process and related industries: ball, plug, gate, butterfly and globe. It is a common assumption that valve test and product standards contain all that is required to ensure adequate performance, but this is not always the case. By adopting the tests specified here, EEMUA expects that the user’s requirements will be better fulfilled, particularly for critical services. (2008, replaces Publications 170-173) ISBN 0 85931 151 1
Price: £47.00		Quantity:

204 Piping and the European Pressure Equipment Directive: Guidance for Plant Owners/Operators This publication gives guidance to plant owners and operators on the application of the European Pressure Equipment Directive (PED) to piping modifications and maintenance. A number of case studies are described and the publication is well illustrated with colour photographs of a range of piping issues. (2005) ISBN 0 85931 149 X
Price: £50.00		Quantity:

200 Guide to the Specification, Installation and Maintenance of Spring Supports for Piping A common problem faced on construction sites and operating plants with certain piping systems, is a lack of specialist knowledge on effective and safe setting and maintenance of piping spring supports, particularly where there is a significant temperature difference between the hot (operating) and cold (shutdown) conditions of the plant. This publication aims to address this problem by providing data on the specification of piping supports (in particular the information required by the manufacturer), information to be recorded in the pipe support index, installation and commissioning procedures, in-service inspection and maintenance, and dynamic restraints. This publication addresses the problem. It covers the specification of piping supports—in particular the information required by the manufacturer—the information to be recorded in the pipe support index, installation and commissioning procedures, in-service inspection and maintenance, and, as a separate section, dynamic restraints. (2000) ISBN 0 85931 126 0
Price: £35.00		Quantity:

199 On-Line Leak Sealing of Piping: Guide to Safety Considerations Certain types of leak from pressurised piping (including valves) may be effectively contained by on-line sealing methods involving the use of elastomeric compounds. These (essentially temporary) repair methods were originally developed for application to leaking steam and condensate systems. However with additional safety precautions, they may be applied to process piping systems containing flammable, corrosive and/or toxic fluids. The publication gives guidance on the limits of application of the technique, the factors to be considered when evaluating the feasibility of its use, the preparation and execution of the procedure and the type of risk assessment required. (2000) ISBN 0 85931 121 X
Price: £20.00		Quantity:

196 Valve Purchasers' Guide to the European Pressure Equipment Directive The European Pressure Equipment Directive (PED) became part of European countries' law in 2002. This guide 'cuts through the fog' by identifying and explaining those areas of the PED that valve purchasers need to know and understand. It also gives information on those guidelines issued by the European Commission's Working Group of relevance to valves. Purchasers of other items of pressurised equipment will also find useful guidance in the publication. Topics include a one-page guide to the PED; how the conformity assessment modules affect valves; routes to materials compliance, marking, certification and documentation; responsibilities of manufacturers, inspection bodies and users; a step-by-step procedure for establishing valve 'category'. (1999, reprinted incorporating Amendments Nov 2000, Feb 2002 & Aug 2002) ISBN 0 85931 106 6
Price: £73.00		Quantity:

195 Compendium of EEMUA Information Sheets on Topics Related to Pressure-Containing Equipment Over the years the EEMUA Piping Systems Technical Committee (PSC) has developed and issued exclusively for Members' use a number of short 'information sheets' on a variety of engineering topics. The PSC Committee decided that a wider audience would benefit from the advice contained in several of the sheets prepared, hence this compilation on topics related to pressure-containing equipment. The topics covered are: detecting and evaluating in service deterioration in pipes and tubes, thermal imaging applications, in-service replacement of bolting, application guidelines for integral block and bleed valve manifolds, pipe flange surface finishes, fugitive emissions, pipe wall retirement thicknesses, use of metric bolting in place of inch bolting for 'class' designated flanges, integrity of small-bore pipe fittings, acoustic emission applications. (1999, reprinted incorporating Amendment Jan 2000) ISBN 0 85931 101 5
Price: £73.00		Quantity:

192 Guide for the Procurement of Valves for Low Temperature (Non Cryogenic) Service This publication has been prepared for users and contractors involved in the procurement of process valves for operation in moderately cold conditions, typically 0 C to -50 C, a temperature range typically not adequately covered by existing low temperature standards. The guide covers recommendations for design and functional requirements, materials, marking and testing. Appendices are included covering temperature limits of non metallic materials, proposed type test procedures and test acceptance standards. (1998) ISBN 0 85931 086 8
Price: £48.00		Quantity:

188 Guide for Establishing Operating Periods of Safety Valves This guide sets out the issues to be considered in determining and reviewing safe operating periods, the periods between consecutive inspections, for safety valves, including setting necessary control procedures. It is a companion volume to EEMUA Publication 184 Guide to the Isolation of Pressure Relieving Devices. (1999) ISBN 0 85931 056 6
Price: £54.00		Quantity:

185 Guide for Hot Tapping on Piping and other Equipment Hot tapping, the term used when a branch is connected to a live or 'hot' piping system, is potentially hazardous particularly where flammable or toxic fluids are present. This publication offers guidance on how to carry out a safe and successful operation when hot tapping into metallic piping systems containing process fluids or their residues. It covers overall planning of the operation and includes hazard assessment and control, the constraints imposed by the nature, temperature and pressure of the process fluids, welding, testing and cutting (drilling/trepanning). Additionally, information is provided for special hot tapping applications such as on storage tanks. (1996, reprinted 2000 incorporating Amendment Dec 1997 ISBN 0 85931 140 6
Price: £48.00		Quantity:

184 Guide to the Isolation of Pressure Relieving Devices Pressure relieving devices generally require more frequent inspection and maintenance that the rest of process plant. By providing isolation, devices can be removed with the plant remaining in operation. However isolation introduces the risk of inadvertent disconnection of a pressurised system from its relieving device; such isolation therefore needs to be rigorously controlled. This publication offers guidance on the design, installation, management and operation of isolation systems, identifying the key points to be considered. Its topics include legislation, national standards, mechanical locking systems and isolation valve selection. (1996) ISBN 0 85931 135 X
Price: £76.00		Quantity:

182 Specification for Integral Block and Bleed Valve Manifolds for Direct Connection to Pipework This specification covers integral block and bleed valve manifolds for direct connection to pipework, used as a replacement for individual block and bleed valves at tapping points in piping systems and also in larger arrangements for equipment and main process isolation. The aim of the specification is to ensure that such installations are fit for purpose and of the required integrity. (2004, 2nd edition with corrigenga) ISBN 0 85931 125 2
Price: £44.00		Quantity:

179 A Working Guide for Carbon Steel Equipment in Wet H2S Service Developed largely from oil refinery experience, this publication is aimed at providing guidance on minimising the damaging effects of wet H2S (hydrogen sulphide) on process plant, taking account of operating conditions, risk assessment, materials selection, fabrication, inspection (both of new and in-service equipment) and repairs. It comprises recommendations based on practical user experience of working with equipment in wet H2S service, together with relevant from reputable sources. This guide is applicable to any process plant handling wet H2S, and should be used in conjunction with User Standards to derive a policy for addressing problems or potential problems in new and existing equipment. (1996) ISBN 0 85931 085 X
Price: £73.00		Quantity:

168 A Guide to the Pressure Testing of In Service Pressurised Equipment This publication has been prepared to give advice to, and act as a guide for, all personnel involved with or responsible for carrying out on site pressure testing of equipment. It applies to all types of industrial pressurised equipment which have begun their service life. Guidance is given on the purpose of pressure testing, including when it is required and what test fluid and test temperature should be used. Practical and safety aspects and the special procedures to be taken are also covered. (1991) ISBN 0 85931 134 1
Price: £28.00		Quantity:

164 Seal less Centrifugal Pumps: Class 1 This handbook defines the minimum requirements for heavy duty seal less centrifugal pumps (canned motor, wet winding and magnetic drive styles) for use where safety, reliability and environmental performance are critical. It can be used for both the specification and purchase of all types of seal less centrifugal pumps. It covers both the basic design and construction of the pumps and also complete pumping installations. (1993, with Amendment May 2002) ISBN 0 85931 114 7
Price: £50.00		Quantity:

153 EEMUA Supplement to ASME B31.3 - 1996 Edition, Process Piping This Supplement contains modifications to the B31.3 Code to cover situations where UK practice differs from that in the USA. It contains requirements of UK practice for piping applications at temperatures below 0°C based on BS 5500. (This publication is no longer being updated, this edition is based on ASME B31.3b-1997 and Amendments 1 to 4 of BS 5500:1997, however it is considered to be still relevant.) (1996, uncludes Amendment update Dec 2000 & Amendment Feb 2002) ISBN 0 85931 051 5
Price: £79.00		Quantity:

151 Liquid Ring Vacuum Pumps and Compressors This publication specifies the minimum requirements for general service, including basic design, materials and auxiliary equipment. It is a composite standard covering all the components and ancillaries, piping, instrumentation and controls, inspection and testing, as well as data from vendors. The publication has been written in API format, for use both in Europe and North America. (1987, with Amendment May 2002) ISBN 0 89531 133 3
Price: £45.00		Quantity:

143 Recommendations for Tube End Welding: Tubular Heat Transfer Equipment Part 1 - Ferrous Materials This specification covers recommended procedures for the tube end welding of tubes ranging from ½ in (15 mm) to 1½ in (40 mm) nominal diameter and from 1.6 mm to 4.1 mm wall thickness to tube plates of 15 mm and over, in ferritic and austenitic materials. (1985, formerly OCMA Spec. TEW-1) ISBN 0 85931 093 0
Price: £28.00		Quantity:

Online Catalogue > MECHANICAL PLANT AND EQUIPMENT