197 Specification for the Fabrication of Non-Primary Structural Steelwork for Offshore Installations
This publication covers non-primary steelwork for all types of offshore installations, including FSPOs (floating production storage and offloading vessels). Topics include quality assurance, safety and environmental considerations; structural materials and welding consumables; qualification of welding procedures and personnel; construction, preparation and assembly; fabrication tolerances; inspection and NDT and acceptance criteria. The publication complements EEMUA Publication 158.
1999, ISBN 0 85931 111 2

194 Guidelines for Materials Selection and Corrosion Control for Subsea Oil and Gas Production Equipment
The document provides an overview of principles and practices relating to materials selection and corrosion control for subsea oil and gas production equipment, and incorporates valuable lessons learned from designers, manufacturers, offshore contractors and operators. It covers cathodic protection, wellheads and Christmas trees, manifold piping, flowlines and risers, valves, fasteners and gaskets, flexible piping, hydraulic control and chemical injection systems, umbilicals, instruments, and protective coatings and insulation.
2004, 2nd edition, ISBN 0 85931 096 5

176 Specification for Structural Castings for use Offshore
In the construction of steel offshore platforms, cast nodes and lifting points may offer technical and/or economic advantages in manufacture compared with fabricated items. However they must be comparable to fabricated items in terms of geometrical accuracy, weldability, and mechanical strength and toughness. Aimed at suppliers and purchasers alike, this Specification sets out the requirements for the design, manufacture and testing of carbon-manganese steel castings for use as structural members of offshore platforms, principally for North Sea conditions. Chemical and mechanical properties are specified, together with the requirements for fracture toughness, non destructive testing and weldability testing. The separate responsibilities of purchaser and supplier are also defined.
1998, ISBN 0 85931 061 2

158 Construction Specification for Fixed Offshore Structures in the North Sea
This publication defines the essential requirements for cost effective construction of primary structures of offshore installations. Topics include material requirements, allowable welding consumables, welding quality and personnel requirements, fabrication tolerances as well as inspection and non-destructive testing acceptance levels. The document reflects a consensus view of oil companies with regard to both fabrication and acceptance criteria for structures to be installed within the UK continental shelf. It is however suitable for application in other geographic areas.
1994, 2nd edition (reprinted 2005 incorporating Amendments April 1997, September 2000, March 2005 & other minor amendments), ISBN 0 85931 074 4

146 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Fittings
This specification covers fittings for piping systems based on the use of tube specified in EEMUA Publication 144. Included are wrought butt-welding fittings, wrought socket-welding fittings, capillary brazing fittings, compression fittings, threaded fittings, wrought branch fittings and saddle pieces.
1987, ISBN0 85931 108 2

145 90/10 Copper Nickel Piping for Offshore Applications - Specification: Flanges Composite and Solid
This specification covers bolted flanges for piping systems based on the use of tube specified in EEMUA Publication 144. Included are composite weld neck and slip on flanges, and solid weld neck and slip on flanges.
1987, ISBN 0 85931 103 1 

144 90/10 Copper Nickel Alloy Piping for Offshore Applications - Specification: Tubes Seamless and Welded
This specification covers a range of 90/10 copper alloy tube intended primarily for use in cooling and fire-fighting sea water service on offshore platforms.
1987, ISBN 0 85931 098 1