Shop

My Basket

0 items 0.00
Shop Terms and Conditions
EEMUA Publication 177 Digital image

2020, Edition 3

ISBN: 978 0 85931 233 2

Featured product:

EEMUA Publication 177 Guide to the UK Pressure Systems Safety Regulations (2000)

Version: Digital/PDF

If you are a user from an EEMUA member company, please log in and download your complimentary digital edition here.

EEMUA Publication 177 gives practical guidance on the interpretation of the UK Pressure Systems Safety Regulations (PSSR) 2000 relating to the periodic Examination of Pressure systems and certain associated aspects, and considers in particular Regulations 2, 7, 8, 9, 10 and 13, plus Schedule 2. The PSSR contains a complex series of requirements and allows for a considerable element of experienced, professional judgement by the User and/or Competent Person, together with a demand for careful interpretation.

Significantly, the new edition of EEMUA 177 includes guidance on the Postponement of Examinations within Regulation 9; a revision to the guidance on Regulation 10 Action in case of Imminent danger; additional guidance on Regulation 13 Modification and repair; together with other key points of interest based upon actual use of Pressure systems covered by the PSSR.

EEMUA 177 brings clarity by explaining how to approach specific aspects of the PSSR and helps minimise unclear areas that can cause confusion about what to do with respect to the Regulations. An example of this is with Regulation 10 wherein EEMUA 177 provides a flowchart that helps the Competent Person decide whether it is a case Imminent danger and needs to be reported to the HSE. The requirements under Regulation 10 are also given context with other relevant legislation. 

This publication was produced by a working group of EEMUA’s User Inspectorate Committee (UIC), which brings together experts from a range of industry sectors. Whilst the guide refers throughout to UK regulations and practice, much of the general advice is relevant to practice outside the UK.

EEMUA 177 does not refer in detail to the other Regulations already clearly expounded in the British Health and Safety Executive (HSE) Approved Code of Practice, Safety of Pressure Systems (ACOP) L122, which is freely available from the HSE. This EEMUA guide, therefore, should not be read in isolation, but should be used to augment the existing ACOP.  

The guidance and good practice in EEMUA 177 and 231 can be applied on site through taking the EEMUA Mechanical Integrity Practitioner Certificate, a blended online learning training course.

Not found what you are looking for? Ask EEMUA

Non-member price: £79.00

Showing 129 product(s)

EEMUA Publication 192 Digital image

1998, Edition 1

ISBN: 978 0 85931 086 4

EEMUA Publication 192 Guide for the procurement of valves for low temperature (non cryogenic) service

Version: Digital/PDF

If you are a user from an EEMUA member company, please log in and download your complimentary digital edition here.

This publication has been prepared for users and contractors involved in the procurement of process valves for operation in moderately cold conditions, typically 0 C to -50 C, a temperature range typically not adequately covered by existing low temperature standards. The guide covers recommendations for design and functional requirements, materials, marking and testing. Appendices are included covering temperature limits of non metallic materials, proposed type test procedures and test acceptance standards.

Non-member price: £82.00

EEMUA Publication 193 Digital image

2013, Edition 2

ISBN: 978 0 85931 190 8

EEMUA Publication 193 Managing competence assurance for personnel undertaking in-service inspection of pressure equipment

Version: Digital/PDF

If you are a user from an EEMUA member company, please log in and download your complimentary digital edition here.

This EEMUA Publication is a recommended practice for Inspection Bodies operating in the process, energy and related industries, whose primary responsibility is for pressure equipment. It presents a structured training, development and competency assessment process for inspection personnel. This revised Second Edition incorporates changes in practice and legislation since first publication in 1998. The scope of this EEMUA Publication is limited to in-service inspection of industrial pressure equipment which is taken to mean all inspections excluding new build and commissioning.

Non-member price: £162.00

EEMUA Publication 194 Digital image

2019, Edition 4

ISBN: 978 0 85931 232 0

EEMUA Publication 194 Guide to materials selection and corrosion control for subsea energy equipment

Version: Digital/PDF

If you are a user from an EEMUA member company, please log in and download your complimentary digital edition here.

The Fourth Edition of EEMUA Publication 194 reflects the significant developments that have occurred in subsea materials technology and operational experience since the Third Edition was published in 2012.

EEMUA 194 is aimed at engineers and others involved in the design, specification, commissioning, operation, maintenance, repair or refurbishment of subsea energy equipment and related facilities, including for both the oil and gas, and renewables sectors. It provides a comprehensive overview of the current knowledge of the principles and practices of materials selection and corrosion control for these facilities. A new appendix in EEMUA 194 covers developments and issues with materials for the following offshore renewable energy forms: wind, wave and tidal.

Some key aspects of EEMUA 194 are the basis of EEMUA's Subsea Materials e-learning.

Non-member price: £247.00

EEMUA Publication 197 Digital image

1999, Edition 1

ISBN: 978 0 85931 111 3

EEMUA Publication 197 Specification for the fabrication of non-primary structural steelwork for offshore installations

Version: Digital/PDF

If you are a user from an EEMUA member company, please log in and download your complimentary digital edition here.  

This publication covers non-primary steelwork for all types of offshore installations, including FSPOs (floating production storage and offloading vessels). Topics include quality assurance, safety and environmental considerations; structural materials and welding consumables; qualification of welding procedures and personnel; construction, preparation and assembly; fabrication tolerances; inspection and NDT and acceptance criteria. The publication complements EEMUA Publication 158.

EEMUA also offers introductory e-learning on Subsea Materials.

Non-member price: £105.00